The Rockspace WiFi extension is easy to set up. Prior doing anything else, confirm that the extender has been attached to a power source that can access your active WiFi connection.
Once switched on, connect your desktop or smartphone to the Rockspace_ext connection using the default password provided in the user manual. Use the default username and password from the handbook and follow the instructions on the page to log in. Select your existing WiFi system.
To complete the set up process, accept any further instructions that are needed The Rockspace extender will provide you a stronger wifi connection by enhancing your WiFi signal and enlarging the area it covers after it is configured.
How do manual set up of Rockspace Wifi setup?
1. Connecting the Rockspace WiFi extension to a power supply is the first step. Verify that it lies within the operational range of your existing WiFi network.
2. Using a PC or mobile device, connect to the WiFi signal that the Rockspace extender is providing. Look for the “Rockspace_ext” network and connect to it. The default password should be in the user manual.
3. On the connected device, launch a web browser and enter “http://ap.setup” into the URL bar using the default IP address, which is often 192.168.0.254. Press the Enter key.
4. There will be a window for login. Consult the user manual to learn the default username and password. Enter these credentials to access the extender’s configuration settings.
5. Follow the on-screen directions to configure the Rockspace extension. Usually, all you have to do is select your current WiFi network from a list and enter the password. You can even set up a separate password and SSID for the enlarged network, if you’d like.
6. Once you have entered all the required data, proceed with the setup process. Follow any extra directions or adjustments as needed.
7. After the extender is configured, it is possible for your device to disconnect from the Rockspace_ext network. After you’ve finished setting everything up, enter the password and SSID to reconnect your device to the newly enlarged WiFi network.
How do I use the wps method for Rockspace Wifi setup?
- After putting your Rockspace WiFi extender into a power outlet, wait for it to switch on.
- Locate the WPS button on your Rockspace extension. It is typically located on the side or rear of the gadget.
- Press and hold the Rockspace extension’s WPS button for a few seconds until the WPS LED starts to blink.
- After two minutes of clicking the WPS button on the extension, go to your WiFi router and press the WPS button there. If your router doesn’t have a physical button, you can enable WPS by going into its settings.
- Allow your router and the Rockspace extension some time to establish a secure connection. The WPS LED on the extension should turn solid once a connection has been successfully made.
- After the connection is established, your Rockspace extension is ready. Devices can now connect to the larger WiFi network automatically.
Rockspace Wifi extender in firmware update?
1. If you wish to increase security and performance on your Rockspace WiFi extender, you should update the firmware.
2. Visit the Rockspace website’s firmware updates section, select the model of your extender that is compatible with the most recent firmware version, and download it to upgrade.
3. Open a web browser and navigate to the extender’s settings using the provided IP address.
4. Once you’ve logged in and located the firmware update option, upload the downloaded file. Follow the on-screen directions to complete the upgrade.
5. Your Rackspace extender’s firmware can be updated to ensure peak performance and address any potential issues.
What is the login method of Rockspace Wifi?
- Connect your PC or mobile device to the WiFi network that the Rockspace extender is transmitting. This network is commonly identified by a name that resembles “Rockspace_ext.”
- Open a web browser on the connected device.
- In the address bar of your browser, type the IP address associated with the Rockspace extension or a specific website address. This information can be found in the Rockspace extension user manual.
- You will be prompted to provide your login credentials. Consult the user manual to learn the default username and password. While “admin” is a typical default for both the username and password, it’s important to refer to your specific model’s documentation.
- After logging in, you will be able to see the configuration interface for the Rockspace extension. After that, you have the option to modify or alter other options, including security and WiFi network details.
How do I reset the wifi extension on my Rock Space?
- Find the reset button on your Rockspace WiFi extender. For this function, the device often contains a small, recessed button.
- Using a paperclip or other small tool, push and hold the reset button for ten to fifteen seconds. Keep it there until the lights on the extension start to flash or change, indicating that the reset process has started.
- Release the reset button and wait for the extender to complete the process. It can take a minute or two.
- The Rockspace extender will return to its factory settings after the reset is finished. Reconnect your mobile device or PC to the default WiFi network on the extender. You may need to use the default WiFi network name (SSID) and password from the user manual.
- Use your web browser to input the IP address or website address provided in the user manual to access the extension’s setup page. The default login credentials that you might want to use have been included in the user guide.
